Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However when you have double-pane windows that are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation, you will need to source some plastic spacers to assist the new pane to fit properly into the frame of the window.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor and could be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

upvc window repairs near me windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to unblock the windows so you can get at the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible so that your upvc window repair windows are watertight and draught-proof.

upvc window repair handles may also become loose. This is typically caused by screws that have loosened over time, but it could be due to the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and perform an initial fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's crucial to take action. Windows that leak water do can not only cause destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how severe the issue is, old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in an ease. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It is essentially a simple process but it can be simpler with someone else to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Faulty window repairs hinges can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to offer advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also decreases the risk of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges can also be misaligned due to wear, causing an opening where the sash and frame meet. They can be repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. The interlock may also become unbalanced. This happens on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace them.

The seals may wear out or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window repairs near me window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the possibility of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be put on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach an point at which it is more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional immediately.